Click to enlargeThe BANDIT III™, the latest addition to the Encore’s BANDIT™ (Broadband Access Network Device for Intelligent Termination™) family, is an industrially hardened cyber security appliance with integrated router, firewall, terminal server, serial to IP converter, legacy protocol conversion, and VPN functionality. Ideally suited for electric, gas, oil and water utilities, industrial plant floors, mobile transportation, and traffic control system applications, the BANDIT III™ ensures system data and SCADA network connections directly to the Internet, secure Wide Area Network (WAN) and/or Local Area Network (LAN), or commercial cellular data IP services. Cyber security is an urgent issue in industries where advanced automation and communications networks have mission critical applications and high reliability is of paramount importance. These industries have mandated industry specific requirements to ensure their data networking and cyber assets are reliable and secure. The BANDIT III™ has the necessary features to comply with the most stringent security requirements. The BANDIT III™ supports up to five serial RS232 ports, integrated four port fully managed Ethernet switch, selectable power supply and redundancy options, and an integrated V.92 modem. In addition, the BANDIT III™ supports two expansion slots supporting optional digital connectivity modules such as 56/64K CSU/DSU or T1/E1 CSU/DSUs, allowing for connectivity to public/private WAN Frame Relay services, and/or cellular connectivity modules allowing connectivity to public carrier secure cellular data services. Supported cellular interfaces include CDMA 1X/EVDO Rev A and GSM GPRS/EDGE.

General Features Security Appliance Features Serial Legacy Support Physical Ports Electrical Mechanical Standards Compliance ▶ Data concentration ▶ Protocol translation ▶ NERC CIP-compliant security ▶ Dialup connection ▶ SNMP manageability (Monitoring and Configuration) ▶ Real-time clock with battery backup ▶ Integrated router/firewall/VPN ▶ DMZ LAN port ▶ NAT ▶ VPN (up to 30 tunnels) • IP Sec (RFC 2401) with DES (56 bit), 3DES (168 bit) and AES (256 bit) • GRE (RFC 1701) • Internet Key Exchange - IKE (RFC 2409) ▶ WAN • Frame Relay (RFC1490) • Asynchronous PPP • Synchronous PPP • X.25 ▶ IP • IP Routing (RIP v1/v2) or static routing • DHCP client/server/BootP/Relay • IP QoS and traffic prioritization • IP fragmentation/reassembly • IP routing over VPN • VRRP (RFC3768) ▶ Ethernet • 802.1q VLAN tagging • PPPoE ▶ Up to 6 DB25 ports supporting EIA/TIA RS232 ▶ Supports any asynchronous or synchronous traffic over IP. ▶ Pass through support for DNP3, IEC 60870-5-101/103/104,MODBUS, CDC, S/NET, CONITEL, ABB, and most electrical industry proprietary protocols 1.7” H x 8.3” W x 9.0” L (43mm H x 213 mm W x 229 mm L) ▶ Power Supply Options • 15 Watts maximum • DC: 12VDC, 24VDC, 48VDC • AC: 100-240VAC, 50-60Hz (with external adapter) ▶ Serial • 1 universal DB25 port (RS232) • Optional four DB25 ports (RS232) • 1 RS232 console ▶ Modem • integrated 56Kbps V.90/92 with PPP support (PAP/CHAP) ▶ Ethernet • 4 switched and configurable 10/100 BASE TX ▶ Expansion Slot Options • CDMA EVDO Rev.A • GSM EDGE • CDMA 1X • GSM GPRS ▶ Alarm Port • Programmable alarm indicators Environmental ▶ Temperature • Operating: -40oC to +85oC • Storage: -40oC to +85oC • Humidity: 5 to 95%, non-condensing ▶ RoHS Compliant ▶ EMI Immunity Type Tests and Specifications • IEC-61850-3 • IEEE-1613 ▶ CE Marking for Low Voltage Electrical Equipment ▶ Product Safety • UL/CSA 60950-1 • EN60950-1 • CSA-C22.2


BANDIT III™ newitem147747348